Reusable Hose Adaptor Kit

The Hydrawand 1/2″ Hose Adapter is a heavy duty, high pressure hose adapter made specifically for the high pressure reinforced Hydrawand Hose. The hose and adapter have been pressure tested to a burst pressure of over 800 PSI. The 5/8 hose nut will unscrew from the Hose Adapter, allowing you to easily cut the hose to any length and reattach it. The Adapter connects the Hydrawand hose to the Faucet Diverter, Toilet T-Valve and Shower.
The adapter will also screw on to all standard handheld shower-heads, allowing you to make a custom length, easy to manage hose for washing pets, watering plants, etc.

Specifications

The Hydrawand 1/2″ Hose Adapter is a heavy duty chrome plated brass reusable adapter. It allows you to cut your hose to any custom length, or cut out a damaged section, and easily reattach the adapter.
The Adapter OD is 15/16, and the Hose nut is 5/8″.

Because of precision tolerances, lubricating the inside of the hose with a water base gel, like  KY, makes it much easier to push onto the hose barb.       Note:  No need to over-tighten, just snug up the nut.  Use a 7/8″ end wrench for back up when removing the nut from the handle to prevent damage to the handle.